PLEKO-THERM-STUCCO-SYSTEM.GIF (4537 bytes)

For the look of stucco with long-term savings, choose PlekoTherm Stucco.  This unique system’s life cycle cost outperforms the conventional cement stuccos.   This simple four-step application process also saves money and time.  The tough resiliency of the Pleko finish coating ensures low maintenance costs for the long term.

Field tested for many years, the Therm Stucco System stands up to weather and wear.  A popular choice for both commercial and residential structures.

Click here to see the technical papers for Pleko Therm Stucco System



COMPONENTS OF THERM STUCCO SYSTEM
Polystyrene Insulation Board

Insulation board is at least one-inch thick and has a minimum density of 1.5lbs. per cubic foot.

Wire Mesh

One-inch x 20-gauge unfired, galvanized wire mesh is applied to the polystyrene insulation board with mechanical fasteners.

Pleko Therm Stucco Mix

This Therm Stucco mix consists of Portland cement, sand, alkaline-resistant glass fibers and Pleko acrylic resin.  The mix is applied by hand troweling or machine spraying 3/8"thick over wire mesh.

Pleko Finish Coating

Eight weather resistant acrylic polymer based finishes are available to achieve any texture or effect required.

Click here to see the technical papers for Pleko Therm Stucco System

Top of this page

 

ADVANTAGES OF PLEKO THERM STUCCO SYSTEM

COST EFFECTIVE

This unique system costs about the same as three coats of cement stucco but significantly reduces total elapsed construction time.  Its resiliency and bond strength reduce life cycle costs and long-term maintenance.

EASY TO INSTALL

Pleko’s simple two-step installation process saves time and money:

1: Apply one coat of Pleko Therm Stucco mix a minimum of 3/8" thick over wire mesh.

2: Apply Pleko Finish Coat to complete the Pleko Therm Stucco process.

TOUGH AND RESILIENT

Therm Stucco’s good looks are designed to last.   The finish stands up to ozone, ultraviolet light, salt spray, freeze/thaw conditions, and chemical attack.  It also resist fading, chipping, and mildew.

DEPENDABLE

Pleko Therm Stucco is a durable system for all types of commercial and residential structures.  Proven by field testing.  Year in, year out.

Click here to see the technical papers for Pleko Therm Stucco System


Top of this page