Plekote is the extra-tough high-build system from the Pleko family of synthetic wall systems.
Plekote has extra protection provided by internal reinforcement and extruded insulation board so it can survive even in the worst conditions. But for all its toughness, Plekote gives you the same beauty and design versatility as all other Pleko systems.
The high-build, thick coat system designed to meet the toughest environmental conditions. Your first choice when ever vandalism, heavy use and abuse are common.
When mechanically fastened
to extruded or high density expanded polystyrene board, it creates an energy
efficient insulation with extra-ordinary resistance to ultra high impact
damage.
Click here for the Plekote
System Technical Data
|
|
| COMPONENTS OF PLEKOTE SYSTEM |
| Plekote Insulation Board |
-Extruded 1.6lb/cu.ft.
-Expanded 1.5lb./ cu. ft. from 3/4"-2" thick provides superior
insulation.
| Plekote Reinforcing Fabric |
An alkaline resistant 4.6 ox./sq.yd. fiber glass fabric mechanically attached to the board helps prevent cracking of the system.
| Plekote |
Click here to see the technical papers for Plekote System Technical Data
|
|
| ADVANTAGE OF PLEKOTE SYSTEM |
Cost effective one step application,
lower over-all material costs and optimum job site efficiency provide initial
savings plus low upkeep costs.
Tough and beautiful despite its ultra high impact resistance.
Plekote gives
designers the freedom to choose from more textures and colors.
Energy efficient Plekote
achieves higher R-Value than thin systems for the same board thickness.
It makes good energy sense.
Click here to see the technical papers for Plekote System Technical Data