|
Pleko Wall Systems: Six Systems to Meet Your Demands |
|
|
PLEKO THERM SYSTEM- Our most popular EIFS Wall System. |
|
PLEKO DIRECT APPLY SYSTEM- Economical Direct Applied Systems for Residential and Light Commercial Applications. |
|
PLEKO THERM STUCCO SYSTEM- Insulated Wall Systems Using One Coat Stucco. |
|
PLEKOTE SYSTEM- Ultra High Impact Polymer Modified EIF System for the most Demanding Conditions. |
 |
PLEKO THERM PLUS SYSTEM- modified to provide a secondary weather barrier over Dens-Glass â Gold substrate. |
 |
PLEKO RAIN DRAIN SYSTEM- The Pleko Therm System modified to allow positive drainage of incidental moisture that may enter the system. |
PLEKO
THERM SYSTEM- Expanded Polystyrene (EPS) or Polyisocyanurate (PI) insulation
board ranging from ¾" to 4" in thickness is either adhesively
or mechanically attached to a variety of underlying building substrates.
The entire insulation board is then reinforced with a fiberglass fabric
embedded in a proprietary base coat for strength and weather resistance.
Once the base coat has been installed, then the wall is completed by applying
a decorative and protective acrylic finish coat. The finish color, texture
or appearance is available in a variety of selections to meet any particular
demand of a building owner. For specific installation guidelines and System
Specifications please refer to our specification section.
Click here to see the technical papers for Pleko
Therm System
PLEKO DIRECT APPLY SYSTEM - A versatile yet economical wall system, directly applied over selected building sheathing. The Direct Apply System is ideal, and cost effective for direct application on soffits and other feature walls where insulation is not required. System can also be used as Direct Exterior Finish System (DEFS). Pleko Direct Apply System consists of Base Coat over the approved substrate, followed by reinforcing fiberglass mesh embedded in Base coat (100% acrylic based or modified) Select any color and texture of Pleko Structure Finish to meet your requirements. For specific installation guidelines and System Specifications please refer to our specification section.
Click here to see the technical papers for Pleko Direct Apply System
THERM
STUCCO SYSTEM
PLEKO THERM STUCCO SYSTEM- A
popular Wall System noted for it’s durability and economy. Therm Stucco
is a fiber reinforced, acrylic modified cement stucco. It is installed over
20 gauge stucco netting and optionally over polystyrene insulation. The
Therm Stucco bas is a nominal 3/8" thick and is finished by the application
of a protective and decorative Pleko Finish coat. For specific installation
guidelines and System Specifications please refer to our specification section.
Click here to see the technical papers for PLEKO THERM STUCCO SYSTEM
PLEKOTE
SYSTEM
PLEKOTE SYSTEM - A high build polymer
modified wall system for the most demanding conditions. The Plekote System
is a ¼" thick fiber reinforced, polymer modified EIFS wall assembly
which incorporates extruded or expanded insulation board mechanically fastened
to the underlying structure Higher Impact resistance and higher R values
for high traffic areas and more prone to abuse environments. For specific
installation guidelines and System Specifications please refer to our specification
section.
Click here to see the technical papers for PLEKOTE SYSTEM
PLEKO THERM PLUS SYSTEM - A system that uses Dens-Glass â Gold and Pleko WB basecoat to offer a secondary weather barrier. One inch minimum thickness EPS foam is attached using Pleko Thick Basecoat in a manner that allows drainage of water that may enter through various wall penetrations.
RAIN
DRAIN SYSTEM
PLEKO RAIN DRAIN SYSTEM
- The system consists of the same high quality components used in the Pleko
Therm System plus more. The system is engineered to allow drainage of incidental
moisture behind the foam. Its design incorporates specially configured grooves
behind the foam. The board is mechanically fastened to the substrate. As
an additional protection a weather resistant membrane is installed on the
face of the substrate between the substrate and the foam. All penetrations
and terminations are also sealed with a special tape that prevents the entry
of water into the system.
The system is backed by a TWENTY YEAR LIMITED WARRANTY*
*Contact the PLEKO manufacturer in your area for details of the Twenty Year Limited Warranty